Updated : 11 hours ago
Never underestimate the backstage roles. When we watch a play or a movie, all we see is the actors performing on a relevantly designed set. But someone did their makeup. Someone designed the set. Someone shot them from just the ‘right’ angle. That is the backend support, which must count more than the visible performance of the actors. RachTR Back Seal is one such backend warrior that holds the fort without being noticed.
We see marble cracks. We see rust stains and effervescence stains. What we don’t see is the cause. It’s crucial to have a strong core for seamlessly perfect exteriors, be it the human body or a natural stone slab. Back Seal gives that strong core.
RachTR Back Seal is reinforced by Nano Impregnating Technology. This sealer provides advanced protection against water, oil, and other stains. Hence, it is applied to the back side and edges of natural stone/marble. The sealer resists water, oil, or rust infringement, which may be stemming from different sources, including the substrate’s expansion/contraction as a reaction to temperature changes, humidity, ageing pipes, or reactions from other chemicals.
RachTR Back Seal is deeply penetrative, which ensures longer durability by closing the pores on the marble surface. Besides, it boosts the adhesive strength of cement or adhesives.

It is especially used to seal the back and edges of marble. RachTR Back Seal is recommended, especially for marble that is susceptible to stains from rust, cement, etc.
Spread liberally with a mop, brush, roller, or cloth; dipping may be needed.
Allow 15–30 minutes for penetration.
Apply a second coat 30–40 minutes later for porous surfaces.
Wipe off excess sealer with dry towels after 15–30 minutes.

Back Seal is one such unsung hero that provides the backstage support for making ultimately perfect exteriors possible in the natural stone domain. If you are considering using it in your upcoming project, visit RachTR’s website: https://www.rachtr.com/.
60 views
60
0 comments
0
Comments